[1] Wang Bing, Liu zhanqiang, Investigations on the chip formation mechanism and shear localization sensitivity of highspeed machining Ti6Al4V, The International Journal of Advanced Manufacturing Technology,2014,75(5-8): 1065-1076.
[2] Qinghua Song, Ganggang Ju, Zhanqiang Liu, Xing Ai, Subdivision of chatterfree regions and optimal cutting parameters based on vibration frequencies for peripheral milling process, International Journal of Mechanical Sciences, 2014(8): 172–183.
[3] Qibiao Yang, Zhanqiang Liu, Zhenyu Shi, Bing Wang. Analytical modeling of adiabatic shear band spacing for serrated chip in high-speed machining. The International Journal of Advanced Manufacturing Technology. 2014(71): 1901-1908.
[4] Qinghua Song, Zhanqiang Liu, Zhenyu Shi. Chatter stability for micromilling processes with flat end mill. Int J Adv Manuf Technol. 2014(71): 1159-1174.
[5] Ji Chunhui, Liu Zhanqiang, Ai Xing. Effect of cutter geometric configuration on aerodynamic noise generation in face milling cutters, Applied Acoustics. 2014(75): 43–51.
[6] Wang Bing, Liu zhanqiang, Serrated chip formation mechanism based on mixed mode of ductile fracture and adiabatic shear. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2014(228):181 – 190.
[7] Du Jin, Liu Zhanqiang, Lv Shaoyu. Deformation-phase transformation coupling mechanism of white layer formation in high speed machining of FGH95 Ni-based superalloy, Applied Surface Science. 2014(292): 197– 203.
[8] Qinghua Song, Zhanqiang Liu and X. Ai. The Influence of Chatter on Machining Distortion for ThinWalled Workpiece Milling. Advances in Mechanical Engineering. Advances in Mechanical Engineering. 2014, Article ID 329564.
[9] 夏峰，刘战强，宋清华. 约束阻尼型减震镗杆. 航空学报，2014，35（9）：2652-2659.
[10]刘战强，吕绍瑜. 镍基粉末高温合金切削加工表面白层形成热力耦合作用机理，机械工程学报，2014，50（17）：186-193.
[11]J Xu, YY Tang, Bin Zou, Z Xu, L Li, Y Lu. Generalization performance of Gaussian kernels SVMC based on Markov sampling. Neural Networks, 2014(53): 40-51.
[12]Bin Zou. Effects of MgO and Y2O3 on the Microstructure and Mechanical Properties of Al2O3 Ceramics. Advances in Machining and Manufacturing Technology XII.2014(6):572-577.
[13]Bin Zou, Y Hu, F Cui, L Jiang, D Yu, H Huang. Effect of surface modification of low cost mesoporous SiO2 carriers on the properties of immobilized lipase. Journal of Colloid and Interface Science. 2014(417):201-216.
[14]Bin Zou, A Cadenillas . Explicit solutions of optimal consumption, investment and insurance problems with regime switching. Insurance: Mathematics and Economics. 2014(58):159-167.
[15]Y Xing,Jianxin Deng, J Zhao, G Zhang, K Zhang Cutting performance and wear mechanism of nanoscale and microscale textured Al 2 O 3/TiC ceramic tools in dry cutting of hardened steel. International Journal of Refractory Metals and Hard Materials. 2014(43):46-58.
[16]Y Xing, Jianxin Deng, K Zhang, G Zhang, H Gao. Effect of femtosecond laser pretreatment on wear resistance of Al 2 O 3/TiC ceramic tools in dry cutting. International Journal of Refractory Metals and Hard Materials.2014(43):291-301.
[17]Y Xing, Jianxin Deng, Y Lian, K Zhang, G Zhang. Multiple nanoscale parallel grooves formed on Si 3 N 4/TiC ceramic by femtosecond pulsed laser. Applied Surface Science. 2014(289):62-71.
[18]S Li, Jianxin Deng, G Yan, H Cheng. Effects of nitrogen flowrates on properties of TiSiN coatings deposited by arc ion plating combining with medium-frequency magnetron sputtering. International Journal of Refractory Metals and Hard Materials.2014(42):108-115.
[19]S Li, Jianxin Deng, G Yan, K Zhang, G Zhang. Microstructure, mechanical properties and tribological performance of TiSiN–WS 2 hard-lubricant coatings. Applied Surface Science. 2014(309):209-217.
[20]Y Xing, Jianxin Deng, S Li, H Yue, R Meng, P Gao. Cutting performance and wear characteristics of Al 2 O 3/TiC ceramic cutting tools with WS 2/Zr soft-coatings and nano-textures in dry cutting. Wear. 2014(318):12-26.
[21]Z Wu, Jianxin Deng, C Su, C Luo, D Xia. Performance of the micro-texture self-lubricating and pulsating heat pipe self-cooling tools in dry cutting process. International Journal of Refractory Metals and Hard Materials. 2014(45):238-248.
[22]K Zhang, Jianxin Deng, R Meng, P Gao, H Yue. Effect of nano-scale textures on cutting performance of WC/Co-based Ti 55 Al 45 N coated tools in dry cutting. International Journal of Refractory Metals and Hard Materials. 2015(51):35-49.
[23]Y Xing, J Deng, Y Zhou, S Li. Fabrication and tribological properties of Al 2 O 3/TiC ceramic with nano-textures and WS 2/Zr soft-coatings. Surface and Coatings Technology. 2014(258):699-710.
[24] Guangming Zheng, Jun Zhao, Zhiyong Li, Xiang Cheng, Li Li. Fractal characterization of the friction forces of a graded ceramic tool material. The International Journal of Advanced Manufacturing Technology. 2014(74):707-714.
[25]Xianli Liu, Bin Jiang, Xuefeng Wu and Caixu Yue. Fabrication and mechanical properties of homogenous and graded Si3N4/(W, Ti) C nano-composite ceramic tool materials. Materials Science Forum. 2014(800): 511-515.
[26]Dexiang Wang, Peiqi Ge, Wenbo Bi, Jingliang Jiang. Grain trajectory and grain workpiece contact analyses for modeling of grinding force and energy partition. The International Journal of Advanced Manufacturing Technology. 2014(70): 2111-2123.
[27]Ying Zhang, Peiqi Ge, Wenbo Be. Plane grind-hardening distortion analysis and the effect to grind-hardening layer. The International Journal of Advanced Manufacturing Technology. 2014(12): 1433-3015.
[28]Fangyi Li, Kaikai Guan, Peng Liu, Gang Li, and Jianfeng Li. Ingredient of Biomass Packaging Material and Compare Study on Cushion Properties. International Journal of Polymer Science. Volume 2014 (2014), Article ID 146509.
[29]Liu Peng; Li, Fangyi; Li, Jianfeng; Guan, Kaikai; Li, Gang; Guo, Anfu. Effect of Starch Plasticizing/Fiber Processing on the Mechanical Properties of Biomass Cushion Packaging Composites. Journal of Biobased Materials and bioenergy. 2014(8):214-220.
[30]Chao Gai，Yuping Dong，Tonghui Zhang. Distribution of sulfur species in gaseous and condensed phase during downdraft gasification of corn straw. Energy. 2014(64):248-258.